View Full Version : Force realtime priority class
rjbstudio
03-29-2011, 06:02 AM
Hi all
When I Force realtime priority class in saw, works much better, but in MWS my mouse losses some funtions. When I start play in MWS multi track mouse starts to scrub instead of play, and try to change ports and chanals on multitrack. anyone else have this happening.
when you turn off Force realtime priority class everthing goes back.
thanks
RJBSTUDIO
Bob L
03-29-2011, 07:45 AM
Sounds like something is interfering with the right mouse functions.
Try turning off special mouse key driver options in the mouse driver.
Bob L
rjbstudio
03-29-2011, 08:30 AM
Hi Bob
At first I thought it was keyboard was sticking but happens on both of my systems, I dont have any special mouse key options on either system.I take it you cant repeat on your system.
Thanks
RJBSTUDIO
Bob L
03-29-2011, 12:58 PM
I have not seen that problem on dozens of systems I have built.
Not sure what might be going on... that's why the realtime priority is an option you can turn on and off.
Bob L
rjbstudio
04-08-2011, 06:05 AM
Hi Bob
I found that if I turn on Hyperthreading Mouse Funtions worked fine when I Force realtime priority class. I only have singel core prosser with Hyperthreading, I think it might have somthing to do with doul core prosser, And as you know hyperthreading dosint work with low buffer settings. seems to work ok when I Force realtime priority class I just Loss some mouse funtions in MWS.
Thanks
RJB STUDIO
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.