brettbrandon
07-16-2013, 12:55 PM
This is simply volume, mute, and solo. It uses an app available from the iStore called "MIDI Designer". There is a free and Pro version.
It also uses a windows midi driver called "rtpMIDI" (free).
Here are basic instructions to get it going....
Both the PC and iPad have to be logged onto the same network.
rtpMIDI
http://www.tobias-erichsen.de/software/rtpmidi.html
1. Install rtpMIDI on the SAC Remote PC.
2. Start rtpMIDI.
3. Choose the "Setup" tab.
4. Click the "+" button in the "My Sessions" window. You should see your computer added to the list.
5. Click the checkbox next to your computer name. That activates the session.
SAC
1. Under "Options, Midi Device Setup", choose the driver with the same name as your session in rtpMIDI for in and out.
2. Under "Smpte/Midi" make sure that Midi-Control is active for both in and out.
3. Under "File, MidiControl Template File", choose the "MidiCtrl_Korg_168RC_Mixer.mct" midi template.
MIDI Designer
1. Download app from app store.
2. Import template into MIDI Designer.
(tap on the link below in your iPad and select "MIDI Designer")
http://www.brettbrandon.com/Korg168RC.mididesigner
3. In MIDI Designer, tap the "More" button and choose "Config".
4. Tap "Connections" in the lower left corner.
5. Your PC should be showing in the "Wi-Fi Connections" window. It may take a few moments to show up.
6. Select your pc from the list. It turns white with a checkmark once connected.
That should be all you need to check it out....:D
http://www.brettbrandon.com/shades/images/iPadMixer.jpg
Brett
It also uses a windows midi driver called "rtpMIDI" (free).
Here are basic instructions to get it going....
Both the PC and iPad have to be logged onto the same network.
rtpMIDI
http://www.tobias-erichsen.de/software/rtpmidi.html
1. Install rtpMIDI on the SAC Remote PC.
2. Start rtpMIDI.
3. Choose the "Setup" tab.
4. Click the "+" button in the "My Sessions" window. You should see your computer added to the list.
5. Click the checkbox next to your computer name. That activates the session.
SAC
1. Under "Options, Midi Device Setup", choose the driver with the same name as your session in rtpMIDI for in and out.
2. Under "Smpte/Midi" make sure that Midi-Control is active for both in and out.
3. Under "File, MidiControl Template File", choose the "MidiCtrl_Korg_168RC_Mixer.mct" midi template.
MIDI Designer
1. Download app from app store.
2. Import template into MIDI Designer.
(tap on the link below in your iPad and select "MIDI Designer")
http://www.brettbrandon.com/Korg168RC.mididesigner
3. In MIDI Designer, tap the "More" button and choose "Config".
4. Tap "Connections" in the lower left corner.
5. Your PC should be showing in the "Wi-Fi Connections" window. It may take a few moments to show up.
6. Select your pc from the list. It turns white with a checkmark once connected.
That should be all you need to check it out....:D
http://www.brettbrandon.com/shades/images/iPadMixer.jpg
Brett