PDA

View Full Version : how can i set up dca for input



caojungt@yahoo.com.cn
11-06-2008, 07:46 PM
just like title.

thx

can i only setup bcr 2000 fader for dac track fader.(9-24)

thx

Bob L
11-06-2008, 07:52 PM
Not quite sure I understand what you are asking?

The BCF2000 units will control the main chan faders... you can use up to 3 units for a total of 24 faders at once.

However, you can use 1 unit and assign it to chase the virtual console and therefore control all 72 channel faders... 8 at a time.

You can easily re-order chans and keep them bunched together for that purpose anyway you like.

Bob L

mako
11-07-2008, 05:24 AM
I'm pretty sure the BCR2000 does not have a template for SAC or SS.

cheers

mako

ffarrell
11-07-2008, 05:33 AM
HI

BCR is the rotory unit and BCF is the Fader unit.

I have both and have played with the Rotory as a fader but is't not very useful becacuse you must place the rotory in 14 bit mode to get a 1/4 db res.

Now if your faders at the bottom position you will be spining that sucker quite a while until it get close to the 0 db range.

If you place the rotory in midi standard mode ( 127 ) you will get jumps of 3 db at a time. ( not good )

hope that helps

thanks
fvf

caojungt@yahoo.com.cn
11-07-2008, 05:38 AM
thx for reply.

i want to konw how can the bcf2000 can control the out put chanle,that 9-24 fader[color is pink} ,i check the bcf2000 now only can control the input chanle 1-24,when use 3 bcf 2000.it mean the sofware now only sent out or recive midi sys file by input fader 1-24,and can not sent outor recive the midi sys file from input fader 25-72,and retrun chanle ,and output chanle 1-24.

i only need 8 fader for below fader use.

one is output chanle master fader1.

2-8 is ouput chanle 9-15 for the DCA control.

thx all for reply

Bob L
11-07-2008, 07:17 AM
As I mentioned in my last reply, you can set the controller chase option in the Mixer menu... then the 8 faders will chase the current hot chan and will control all chans of the mixer, including returns and output chans.

You can also bank switch the 8 faders from the unit itself and work your way up to the out chans.

I also mentioned, you can reorder any chan in the virtual console to any position and therefore denote any 8 faders to show up side by side to be controlled by the 8 faders of the unit.

Bob L

caojungt@yahoo.com.cn
11-08-2008, 08:40 PM
thx bob ,,i got it now .

but i use the macike mct file not bcf2000 mct file for bcf2000 .it is perfeat .

i got all 72 input and return and output chanle control.

including fader, mute, pan ,solo ,eq ,aux ,com ,gate ,fx,input gain,but when i usr bcf 2000mct file ,nothing move on bcf 2000.

anyway ,i can control sac now,so what ever which mct file .http://posa.cn/ltbbs/upload/2008119114001-3.jpg

caojungt@yahoo.com.cn
11-08-2008, 08:41 PM
http://posa.cn/ltbbs/upload/2008119114014-3.jpg