Zoom Mixer not linked to hot channel

Hi,
during my testing I recognized that the zoom mixer seems not to be linked to the hot channel anymore. I use 4.6 and everything else seems to work fine. Double checked the 'Link Zoom Mixer View to Hotchanel' setting.

Hello,

Working alright here. Try closing and then adding the Z-Mixer view - View - Zoom Mixer. See what that does?

Hi
close -> open -> Z-Mixer will come up with a wrong channel number.
Noticed the problem only after doing some F1-F12 stabiltiy test.
Cleared the default key file -> all ok.

Tomy,

So ... all is working now?

Yes.
Seems that there was something broken in the F-Key file.

Realize that if you right-click the Zoom Mixer Close button, it will lock the mixer to the current chan and it will no longer chase until you unlock it by right-clicking the Close Button again.

Bob L

Hi Bob

Thanks for reminding me on that very nice feature.
But the problem was not related to it. I was able to close the Z-mixer, which would not be possible when it is locked.
When I reopen it, it always sticks to channel 47 no mater which channel was selected as hot channel.

The monitor F Mixer and the Full mixer were showing. The Pop-up shows the mark on the correct position and the monitor mixer tracks correctly.

But as mentioned before I was able to fix the problem by a reset of the F-Key file.

Tomy