Montarbo Stagebox or similar RML labs branded solution
Dear Bob,
near future i want to build a festival gig, imaginable that released Montarbo Stagebox or similar this year? I need remote controlled preamps.
Really like install SAC System in our Church, but in wild: constantly changing channel lists and smallest changeover times i will work complete recallable channelstrips incl. gain settings.
Thanks for your reply!
Best Regards,
Balint
Re: Montarbo Stagebox or similar RML labs branded solution
I'm currently changing from a motu 2408 based setting to a Dante system.
Currently I'm using up to three TIO1608-D for I/O and a Audinate Dante -> AES Adapter.
I/O is done using Yamaha AIC-128D pci-e (4!!) card.
You can use the Yamaha R-Control. I'm using a SAC-plugin (currently 32 only) and an external server software to control the gains + phantom.
I've also tried the build in HW I/O but it seems not work correctly at the moment (SAC does not recall / manage correctly).
Regards
Tomy
Re: Montarbo Stagebox or similar RML labs branded solution
Am I reading this wrong.... 4 yamaha Dante pcie cards?
Re: Montarbo Stagebox or similar RML labs branded solution
Quote:
Originally Posted by
Reujonik
Am I reading this wrong.... 4 yamaha Dante pcie cards?
Pretty sure its just a single card, you wouldn't need more than one for the 3 stage boxes.
Re: Montarbo Stagebox or similar RML labs branded solution
yes I am....I see now. Pcie 4 slot.
Re: Montarbo Stagebox or similar RML labs branded solution
Sorry for the confusion.
It's one card. It supports 128 In and 128 Out via Dante.
Tomy
Re: Montarbo Stagebox or similar RML labs branded solution
Hi Tomy,
can you tell us more about the setup?
What is the lowest latency you can go down to?
How many plugins, FX, GEQ, REV, inputs with what PC setup?
Thanx!
Re: Montarbo Stagebox or similar RML labs branded solution
Well, I just did three gigs with the Dante based system. This was a maximum of 32 inputs, up to six monitors, three fx ( 2 times valhalla and a chorus) and a bunch of SAC Eq and Delay plugins.
The performance was similar to the motu system.
Os is windows 8.1
Running on 1/64 without any problem. Dante latency settings are 0.5ms (except for the AES/EBU adapter which can not be set lower than 1 ms) and the latency monitor in Dante shows arround 180us latency ( Using a simple two switch network).
Because my mainboard was quite old (E8600) I'm currently updating to a i3-6320 3900MHz on a asrock B250-M4 Pro board. First tests indicate a significant lower usage ( around 25 % on previous system and around 12 - 15% on the new one), but that's just a bench value.
Tomy
Re: Montarbo Stagebox or similar RML labs branded solution
Quote:
Originally Posted by
TomyN
You can use the Yamaha R-Control. I'm using a SAC-plugin (currently 32 only) and an external server software to control the gains + phantom.
hello Tommy
what SAC-plugin are you using? and what external server software?
jan
Re: Montarbo Stagebox or similar RML labs branded solution
Hi,
both pieces of software are created by myself.
There is a nativ sac plugin which controls gain / phantom of up to 64 channels.
https://www.satlive.audio/test/sacTioPlugin.png
And a small external server which takes care of the control of the TIO and of the synchronisation on different instances ( host + remotes).
https://www.satlive.audio/TioSacServer.png
https://www.satlive.audio/test/TioSacServer.png
Tomy
https://www.satlve.audio/test/TioSacServer.png