Please don´t misunderstand me, i fully understand that alot has happened since, and i´m not claiming a free upgrade, i just wanted to say i understand if someone expected something else based on...

It´s not nice being a rabbit that´s allergic to wool, is it :)

Well, it´s not that easy to change, i used a hex eitor to change the behavior.
And as i don´t really use the BCF2000 any more, i´ve forgot the most of it.
I would recommend using the standard,...

My all time favorite is my 50watt marshall from 1970 through an old 2x12 open cabinet with greenback from late 60.
I have owned many different amp, but this one was the one i kept when i started...

Depends on your needs, bu in the pop arena it´s great. And for singer/songwriter stuff.
I have alot of different acoustics, and the martin is high on the list. But i use an old Gretch folk model...

What are you building that on. VIA chipset can be as good as others, just buy the right one. Alot has changed since the awfull old 133 days.

For the first time you actually get more power for the same price with an Intel. They´ve just lowered the prices. A Intel D950 processor is a good choice right now if you look at cost vs...

I work in both. And it´s a bit of pain to convert.
Looking forward to 4.0 where there will be new ways to mix down tracks easy.
PT is really week when it comes to importing BWF files, unless i´ve...

You could try and contact the developer, that´s what i do when i have a problem in Saw, and then he´ll fix it a couple of hours later.
Not sure Pro tools is handled that way though:D:D

For live mode, i can actually see the idea, to have it this way. But i really think it cold be accomplished by using a remote. But it would have to be made as i have changed the Behringer BFC2000...

This is just a small trick i often use, and some of your probably also use it.
When i wan´t the compressor to be at zero or near on a bass track, i simply copy the track content to another track,...

I´m trying to get rid of the just recorded data (a little old) and have the part that was there before i made a punch in.

Sometimes, we try another ending on a tune, just to see if it´s better....

But the old overwritten midi part will still be gone.

You have to do the drum editing before you pack down the kit. I allways do the worst drum edits while every ones ready for another take, sometimes i works and sometimes you need to make another take....

Okay, so i need a little different workflow when i use midi too. Just currious how others work in these situations.

1) I know that midi just stas in memory, my wish was just that the retake, would...

When i use MWS to record midi while recording audio, i would like to find a way to use retake or something similar, how do you folks do this.
Retake works only for audio, but when i´ve recorded a...

I really hope you´ll have some time to enjoy a little of the summer too.
So you won´t get burned out.

This is the name of the thread.
I think the program is ver 3.1 now. but it does the same.

Fireface Problem - Overlooking the Obvious?

Also check out the PCI latency, i run a fireface on a HP, and before i adjusted the PCI latency, it couldn´t even run at 1024 buffer, now i can run 2x64.

There´s a thread in this forum.

Yes.
I´ve built a couple of preamp, both tube stuff and opamp based.
And the thing that really gives it the "warmth" is the transformers not the tubes.
Just my experience.

This is a nice program.
And yes you can use VST instrument inside SAW, just as if you plugged a synth into a mixer.

The most important to understand is how the workflow is designed. There´s alot...

Thanks for a great tip!! :)

If it***180;s small corrections i use the Sonoris Pitch&time.
And for very bad singers with a serious pitch problem, i use melodyne. With this program i can have anyone to sing in key. The downside is...

Q: How do you get 2 Accordions to play unison.
A: You cut off 3 hands

Thanks Pieter
I really like your plugins. I use, your Meter and MS codec all the time.
Until the Fix i´ll just run 2 instances if it´s required to go from + to -

And once again, great product....