You could hook up a dual-FFT Analyzer like SATlive, smaart or SIM or ... and feed the min in the reference input and the piezo into the other one. This yield the differenct between the two signals,...
Type: Posts; User: TomyN
You could hook up a dual-FFT Analyzer like SATlive, smaart or SIM or ... and feed the min in the reference input and the piezo into the other one. This yield the differenct between the two signals,...
I did not manage to cure a piezo connected to a standard passive DI using EQ or FX on the desk (But I very seldom had to mix an acoustic guitar with steel-strings with just a piezo without...
Do use a high impedance input? In most cases a high impedance input (active DI or that like) solves that kind of problems for me.
Looks nice, but I'm on 64bit :-(
The MackieMcu templates work fine with the xTouch, tested with 8 channels and 16 channels.
Did you choose FX-Source setting in input assign?
Hi,
used it (registered version) yesterday for the first time for checks and intro music.
- With a remote connected I've noticed a few audible distortions for about half of second, producing a lot...
Unfortunately the AIC-128 (128 Channel Dante I/O Card) does not support analog audio :-(
Just testing. Started without the runtime dll :-(
But working fine on the demo system in my office.
Hi Dell
64 Bits
Tomy
Hi,
I'm looking for a real simple player which can play wav (mp3 would be nice) as a plug-in for SAC
Agreed. And in case you'll want to use hardware dante, I'd use a dante pci card like the yamaha AIC-128D, which bypass the 'bottleneck' USB and would be cheaper than the RME solution.
'We'll fix it in the mix' will not always work, especial in live audio.
Try to get a DI with an input impedace as high as possible. Any powered DI will improve the result.
The radial - stagebug SB-4 piezo could improve it further, but the most impressive result is...
Try to get a DI with an input impedace as high as possible. Any powered DI will improve the result.
The radial - stagebug SB-4 piezo could improve it further, but the most impressive result is...
Make sure that the mixer settings in SAC (width, samplerate) match the settings of VIA
Install at least two CAT cables from backstage to FoH.
As mentioned before, you can use digital audio over the CAT, or use XLR - CAT adapters (for example https://www.cat-core.de/en) to route audio...
Yes, but in Germany :-(
Basicaly you can use min/max to define the range of the CPU frequency.
Modern CPUs are able adapt their frequency to the current load conditions, thus saving energy.
Minimum and Maximum...
x-touch Expander and x-touch working here from 8 to 24 without problems (via rtpMidi ).
I prefer 16 In / 8 out Units ( no need for 16 outs) in 2 HE :-)
Nowerdays I'd suggest a Dante based system, which will add even more flexibility. The Dante PCI Card can handle 128 In and 128 Out channels.
Well, it just looks cooler than OFF
In MIXER -> SOLO MODE checke the SOLO IN PLACE setting (at the bottom of the menu)
Looking forward :-)
Connect With Us