I run all my SAC setups at 2x64 sample buffer settings which provides a very realtime experience with no complaints about latency from anybody. You should be able to achieve this if you follow my...

In the Mixer Menu under Navigation Links, check the Mixer Views To Hardware Controller option and the AlphaTrack will chase the hottrack.

Bob L

You can record a live stereo mix of anything you do in SAC as a live mix, capturing all SAC moves and processing... assign one of your output busses to one of the eight recording bus choices and then...

It could also be bad sectors on your hard drive... depending on where the audio session is located on an older harddrive, there could be some failing sectors in that area which are causing the system...

Yes.

Bob L

Not sure what might be blocking your midi port... but I'm pretty sure you will want to use the Mackie MCU Pro template for the X-Touch.

Bob L

That really is a gorgeous shade... great work.

Bob L

The import does record the signals flat at the top of the chan... the eq and compression settings are imported to the SAW chan so that playbackback starts out matching the signal settings that are in...

Already been done for many years now... its how samplerate conversion is handled.

Bob L

There is a rename Regions in the Regions menu... use that to simply rename any region however you want.

Bob L

The Mackie MCU can be used to control the entire chan strip... eq, compressor, etc... use the Mackie control template with it.

Bob L

Most likely there is a missing name resolution service on the one that does not work... I don't remember all the network services that need to be running for that to work, but it probably has to do...

Sometimes, importing midi from certain midi programs may set the tick setting to a different value than one of the default common values which could be the source of the issue.

Bob L

Session crashes here also... but I did notice that as the session opens, there is no setting checked for Tick Resolution... somehow it has a tick res that is not one of the menu selection defaults......

My Bad... I totally spaced the fact that we were talking about the Return and Out tracks when I mentioned using blank regions as place holders for automation... duhhh... senior moment here.

You...

You can also use Blank Regions on Return and Output tracks as a place holder for automation entries.

Bob L

There are many variations on where you hear the solos and what audio it interrupts or doesn't... check the helpfile... it is explained in detail in the menu reference guide section of the Mixer menu....

Check that there is not some plugin patched in the output section that might be blocking the audio thruput... if a fresh install works, perhaps there is something hidden in the loop.

Bob L

Pedro... try to checkout as a guest rather than using an account... see if that helps.

Bob L

Working on it... dozens of vst3 plugins are working... other dozens not... its a tough scene because it seems everybody interpreted the interface on their own since documentation is as stupid as the...

Bluecat Patchwork has worked well for me in the 64 bit SS. There are some compatibility issues, but seems to work fine for many of the vst3 plugins.

I am writing VST3 native for SS64, but there...

Stick with Windows 10 for as long as you can... you don't need any more updates... in fact I do my best to stop the machine from updating... set up your system and keep it clean from the internet...

I don't.

Bob L

SAW can only use one Mackie unit... since you are not really mixing live during a mixdown in SAW, I felt that 8 faders was enough.

Bob L

Try out My Levelizer plugin... pretty tough to beat as an overall bus compressor, if I do say so myself.

Bob L