Hi John, it's pretty basic. If you patch pre-fader on the aux send on the individual channel the audio will pass regardless of the channel fader.
You wan't to patch post fader, which will also...
Type: Posts; User: cgrafx
Hi John, it's pretty basic. If you patch pre-fader on the aux send on the individual channel the audio will pass regardless of the channel fader.
You wan't to patch post fader, which will also...
Vienna is not a DAW its a distributed VST host server that lets you run Plug-ins across single or multiple additional slave computers (including mixed Mac/PC systems).
Delay on the output is good if audio is early, but doesn't help if the video is ahead of the audio. A lot will depend on how the video is being processed/switched and streamed. If your using...
Yes, I was specifically suggesting doing the custom wiring at the individual device patch bay solder lugs but could also be on the individual device connectors.
Yes, all patch cables will be TRS.
Will depend on the patch bay, but if it's a wire soldered to the back, then you would specifically wire as TS, not TRS. Also you'll need to know if the sends and returns need to have the Ring...
The Dante Virtual sound card driver may have too much latency to use for monitor mixes (although they do say 4, 6, or 10ms). The question is going to be what is the input to output latency through...
here is a really good article with diagrams
https://www.ranecommercial.com/kb_article.php?article=2107
The most critical issue is going to be mitigating ground loops which unfortunately will...
Hi Dave,
Don't overthink this. Set aside a section of the patch bay for unbalanced gear, (meaning leave yourself a few extra spots for expansion), and just normalize the wiring of the patch bay...
https://www.youtube.com/watch?v=vrXGaFV1AmE
I believe the juice plug-ins work fine in saw studio, but have a problem in SAC when using scenes. so it would only be the subset of users that are making use of scenes and trying to make changes to...
She is wearing a lav mic, and again I'm 100% positive the input from the sampling mic is gated by the input from the guitar, otherwise it would be adding all sorts of unneeded and unwanted data to...
Most likely because she is not playing the guitar while she is talking. Since there is no direct guitar input there is nothing to match the mic input to and it simply gets thrown away or not recorded.
Keep your 32-bit sessions and 64-bit sessions separate.
There is no reason to load all of your 32-bit and 64-bit VSTs in both versions of SAW Studio.
The 32-bit version of Saw Studio should...
Open source means its not dependent on the original developer.
Just have to find somebody interested in contributing. As for the brush off from the original developer, that is of coarse...
So one of the things that should be considered, Juce is an open source library. Meaning it could be patched to fix the issue in SAC/SAW.
That would be the most useful approach with the added...
from the digging I've done on this over the last couple of days, its specifically an Apple Silicon/Arm processor vs intel issue.
You have to install win10/win11 Arm on the virtual machine...
looks like this maybe a win11/parallels specific issue. Not 100% sure if win10 would work or not, as the references didn't address that specifically, just that win10 was working (But it didn't...
Parallels 13? are you sure. They are on release 19 and I don't believe anything older than 17 or 18 would even install on an Arm-based Mac.
Your interface needs to be plugged in after your VM is...
What version of parallels are you using?
You do have to launch parallels and then plug in your interface so you can tell parallels which system to connect the interface to
I haven't had any issues with parallels seeing my interfaces. If they show up on your mac, they should be available to Windows under Parallels.
You do have to configure parallels to tell it how to...
You have to explicitly hold down the fn key get to the function keys on the Mac Keyboard to work, or alternatively hook up an external PC keyboard.
There is also a system setting that has to be...
There are other less expensive Di alternatives
$99 - https://www.sweetwater.com/c957--Ess_Direct_Box?highlight=StageBug4
$89 -...
1. I didn't take your question as being rude or obnoxious and 2. They have, thats why they make DI's specifically for Piezo pickups.
I'm I correct that your connecting the pickup directly to your...
Are you using a Piezo compatible DI box?
if not.. I'd look at one of these.
https://www.radialeng.com/product/pz-di
The PZ-DI has a variable load selector switch that allows you to set the...
Connect With Us