One of my house gigs is set up like this, only a little worse because there are also three other connected rectangular rooms. I play to the 'pie' which in my case is where the dance floor is - the...

Here's my $0.02:

In the video you've got a small stage, looks like a small hard room with a little PA. The lead vocal sounds good for this situation BTW.

Firstly, the lowest root note on a...

Different strokes I guess, but I actually prefer a 15" mid range because they allow me to cross my subs lower or use my subs from an aux send. I like my top cabinets to be 'full range' down to about...

Someone else had built something similar a while back, but seeing this pop up again, I have to ask:

It seems t me that you are making a little wall to mix behind, as you have that large, flat...

As far as I can tell, it's only 2in/2out.

Yes, those promix cases are really heavy too. I still have them but I've since switched to JL Cooper cs's and a Behringer for smaller shows.

It's easy to spend lots of money on cases though.

That's very similar to my initial design, only smaller:

http://forum.cockos.com/attachment.php?attachmentid=21207&stc=1&d=1399437260

I have two of these for when I use my Promix01's as control...

That's a great mix. Good job, the video work was pretty good too.

I've been a subscriber to his YouTube channel for a while now.

I have a similar setup for my bigger rig (MR-1), but it doesn't get as much use as MR-2 is smaller and more portable.
...

Yeah the over driven sound is a bank of channels on the x32 going bad, you can hear it much worse here:

Distorted acoustic channel

This time I was using a pencil condenser on the acoustic and...

Here is a frequency chart you might find helpful, there are lots of them out there:

http://www.independentrecording.net/irn/resources/freqchart/images/main_chart.jpg

Monitors are a little...

The amp that they guy is bringing has a DI out on the back of it, just run a line form there into your acoustic channel on your mixer and you are good to go.

The only other thing I would suggest...

You align the system with itself using pink noise or program material. What is important is that crossover frequencies that are produced by 2 different cabinets are aligned so that the common...

I use this cross-over RS-MET Crossover

Like the other's, don't try to change it with your amps on, because it will tick and spit at you.

I found this when a discussion on high slopped filters...

Lol, yeah something like that...

Heyyyyy,

Is that bass player playing a Furlanetto Bass? (an F Bass)

George Furlanetto is an old friend of mine, I started out working at the Guitar Clinic in the late eighties.

I never really made videos because I'm not a player I mix FOH.

The two track out will normally get the job done though. With all of the x32's all over the place all you need these days is the USB...

It's hard to tell because she holds the mics up in front of her boobs and my mind starts to wander.....

Ethernet over XLR? Why would you want to do that, may I ask? It sounds way more expensive than just running a cheap CAT 6 cable. Especially when you consider that you'd need 4 XLR channels and all...

Yep, usually USB keys or something I write with.

The Arduino rocks, however this isn't nearly as fun as launching stuff into the audience with a fader flip.

I doubt it, but she is kinda cute.

Carrot Mom

Here is what Her flute sounded like through Her SM58:

Flute mic'd with SM58

BTW, She's also the 'Carrot Mom' in the Walmart Christmas commercial.