I suppose it depends on the playback system as well...With a good set of headphones or my monitoring setup, the drums and bass jump right back into the mix.

The room has a very nice LF response...

Agreed on both counts...I think this was a freebie VST reverb plugin. It's been a while since I set it up.

As for the drums, since I didn't have the house and recording mix split in this case, I...

Live worship service. This was NOT multi-tracked...it was my live stereo mix out of SAC through a Compellor into an external PC running Adobe Audition.

Yes, I know I could have done it in SAW...

Haven't used the surface pro specifically but I did recently purchase a Samsung Ativ 500T (and the optional keyboard dock). Works just fine. This is another x86 based tablet--very light and good...

The others posts have given you good advice on what the sync settings should be both on the ADA8000 and the RME card.

+1 on the RAYDat cards. I have a system running two of them with M-Audio...

I'm primarily using the 2626 as a standalone interface but I have used them successfully on a couple of systems via firewire. Unfortunately there are too many variables out there to guarantee...

I'm using sync over lightpipe for a set of M-Audio ProFire 2496 units in standalone mode with a pair of RAYDAT cards. Very stable. (Yes, I know some are probably wondering why I would use the...

I don't know about this particular Lenovo tablet but I've been considering similar HP and Samsung tablets running Windows 8 as SAC remotes. They key is that it MUST have an x86 based processor and...

I turned off multi-core AND hyperthreading...May not have actually needed to turn off multi-core now that I think about it and I think my previous P4 based system had hyperthreading enabled with no...

One note about a 2nd RAYDAT card in certain motherboards...You MAY need to make a change in the BIOS to enable a second PCI Express x1 slot--otherwise the resources are used for an x4 slot and other...

I think you might be fighting a losing battle here...Never had much luck with Biostar motherboards, personally (SAC or otherwise). Others on this list may have had different experiences. Usually I...

FYI. Just completed my build and first run on a system using the Asus P8Z77-V motherboard with a Core i3 2120 processor and 8 gigs of RAM. Audio interface is a pair of RME RAYDAT cards connected to...

Actually building a system with that board and a pair of RME RAYDAT cards as I write this...Took a chance since I didn't see anything good bad or otherwise about this board. Will let you know how it...

Another recommendation here for the M-Audio Profire 2626 units. They work well as a 26 channel bi-directional firewire interface (good for smaller rigs up to 24 channels) OR as standalone converters...

I'm really curious to know which shade you're using in this photo...

--
Shane Toven
Lead Sound Tech
Harvest Christian Center
Laramie, Wyoming

Edit: I forgot to mention that Harvest's sanctuary seats around 400. We currently only run one service per week but are soon going to move to two. The ability to multitrack will be a HUGE plus for...