Was the update applied to Remote?

That worked. All fine. Did a show tonight 500 pax with 40 inputs, for and 6 stereo in-ears... Thank You Bob, would have taken quite bit of time to figure out myself.

Any idea?

I had a working system with one RayDAT and BCF2000. I installed second RayDAT, which is working fine at 1x64, the BCF midi out port is no longer available in MIDI setup dialog. On input...

Or just search this forum with shell2vst... A lot of information.

You need to extract the dlls from the shell. Look for an utility called shell2vst. This program comes with instructions on how to use it. Note: Look at Waves site which plugins are available with 0...

Found this:
"This (common) problem has been resolved with a Midas-designed preamp which uses a stereo VR with laser-trimmed carbon tracks."

Source:...

http://www.sawstudiouser.com/forums/showthread.php?p=185418#post185418

True. No real options for stage boxes, but this is first host capable Dante card I've seen.

ADA8000+Appsys working flawlessly and with lower latecies.

Interesting! Dante network compatible.

http://us.focusrite.com/ethernet-audio-interfaces/rednet-pcie-card

Enttec DMXIS does just that. Standalone or VST plugin.

http://www.enttec.com/index.php?main_menu=Products&pn=70570&show=description

Tried Valhalla DSP... Became my favourite that instant! Bought it. Thanks for the tip! From small rooms to insane halls... in excellent quality.

You need to remove SPDIF from SAC output list. Otherwise foobar is not able to use that port for playback.

In Options->Audio Device Setup change output (RME SPDIF?) to Not Assigned.

Thank You Mr Ingraham! I haven't noticed that you can assign SAW outputs inside SAC input when linked. I was looking at SAW side the output assignments... I kind of guessed it must be somewhere. This...

A show is in planning where I will get mono tracks with automation and some stereo material for playback (also click tracks with cue comments). Idea is to use SAC for mixing and SAW for playback of...

I think that there shall bee limitations/chanllenges on single channel VST with the I/O assignment. The physical connection must be told to both VST plugin and SAC/SAW assignment. I like the idea of...

The idea behind using end fired arrays is that you do not give away one elements input to max SPL in front of the array. With reversed (or polarity reversed) systems you lose on max SPL in front of...

CdEx has been reliable and my favourite. GPL does not hurt.

http://cdexos.sourceforge.net/

FOH contains currently 2 x 23" Acer (cheap and very light 170€/pc) HD LED backlit displays. Mackie surface. Both displays, keyboard and mousepad in modified floorboard case. Mackie surface on top...

Can't belive how many issues people have with nVidia... I have used hardware with both 9500GT and 9800 cards without any issues in dual RME RayDAT system. Channel use usually 32-48 channels with six...

That's why I have the ducking gate in the system.

This is the way to go. I should have mentioned that the condenser we use is actually a DPA omni. For this purpose any omni RTA mic performs well. The good thing with omnis is the almost nonexistent...

I think almost anything works for this purpose. For spare we have wired mics anyway on the stage in case the wireless acts badly. Like to keep those dedicated for spare use only.
Using mostly...

That's what I have been doing for some time... except I use a small condenser instead. I'll usually place a gate in ducker mode in the channel, so it kind of automutes when band gets noisy.

I have several preamps that have AES or SPDIF outputs. I happen to have two Aphex 207D. And it's handy to feed PA DSP through AES output... or my heaphone amp via SPDIF.

Actually two raydats is 72 channels i/o. You forget the spdif and aes.