I have the Pro3, love it. I believe the hardware on the Pro 2 is functionally the same aside from the obvious screen real estate & the pen. My primary caveat: daylight visibility on either is in the...

We've experienced fader oddities with the presonus consoles in the real world. First, they are not moving faders, which is a non-starter for many folks...but that aside; as they age & encounter the...

My pro3 at 12" and 2160x1440 is great. I realize quality of image sometimes suffers with resolution scaling, so one of the first things I did with it was checked to see how it looked if I 'blew it...

I disagree, remember that resolution is the maximum. No reason you can't dumb it down a bit if you need elements to be larger.

We're losing them faster than we're replacing them. Particularly those who practice that lost, dark art of actually singing. Rest well Joe

Thanks Bob, I knew that (hence the "I realize it's only two taps with the stylus to do it")...good to reiterate though as others might well have missed that.
Wasn't really listing a problem as much...

I tend towards drum loom historically. I buy lots of the same XLR cable when buying, & just dedicate some of them to becoming looms. Rather than a traditional loom I make a flat braid of either 6 or...

For the record, so far I freakin love my surface3. I use it all of the time.

I do wish the stylus buttons were programmable as a dedicated erase button is nigh onto useless for me & the top...

To expound a touch more about amp placement: in my perfect world, open back amps should almost always be at side of stage pointing in, and closed back amps should be either there, or on the monitor...

The Sonalksis compander is a downward expander and/or upward compressor. You can make each band do either, it also features frequency consciousness on each band and a global filter for the whole...

To put it mildly, gates are very tricky to use on vocalists live. Generally not recommended. If you want some noise reduction on vocals, an expander is a better choice as the threshold point isn't...

IMHO, you may be limited to around 2x64 or 1x128 buffering by your CPU & motherboard. Back when I was using a couple of similar P4 based computers that was the best I could ever get to be stable and...

fair enough, thanks for the terminology correction, cable adapter set it is then.

Dropkitty: my cute name for a DIY xlr to RG45 balun set, easy to make of you have some basic tools and decent soldering skills.

Here's a thread about how:...

and yes, there is no reason you couldn't make a dropkitty set to use a Cat5/6 cable to run up to 4 balanced analog signals either direction. Saves weight and expense over a traditional snake cable.

I went with Supermicro chassis, they make several that are relatively unique, 1U & short (14"), or stupid short(9")...in addition to the ones that are too long that dominate everyone else's designs....

I just lucked into a used Anvil 17U shockmount rack left at a club I work with 2 years ago by some unknown visiting production. It was empty...and now it's not ;)
I have turned it into an all in one...

I return to my earlier advice about adat and firewire cables: Lexel
It is a latex modified silicon, put the cables in place, and put a blob in place to bond the cable in place to the chassis. It...

well...How's your woodworking? You could always brew your own.
The JBell design that Yogi posted here a while ago is a 105dB efficient sub down to 40 Hz with a 500WRMS rating. Extremely simple build...

If you click on the "unrecongnized format" it should give you a drop down menu to allow you to select your card. If it does so, select it & you're good to go unless the problem recurs (which mine did...

it depends entirely on the makeup of your whole rig to give a 'real' answer. as others here have said, switchmode power supplies often don't really care what is coming in, they'll happily sample it...

I realize that my grumping threw this thread OT & I apologize, my point was merely to show that so many here grouse that a one-man shop with a smaller user base hasn't embraced multiple OS, but the...

realistically, IMHO 'equipped decently' is not the question.

As a remote, the first gen ipad wouldn't have sucked. what does a remote really need except a screen with adequate resolution and...

On my Surface3 I just set compatibility for SAC as "XP SP3" just as Bob recommended, no other tweaks...working great as a remote.

edit: just recalled that oob SAC remote set a resolution override...

Rofl
Where's my proofreader? Why didn't she catch that before it went to press?
I think & type in a pretty nonlinear fashion, sometimes things get missed in the cleanup/translation into a format...