That's pretty much what I'm doing, are you saying per step 2 set the Aux level to 0db on the channel? I need to be able to adjust the effect individually, i.e. some channels more or less reverb etc.

I'm having a bit of issue with setting up simple Reverb and Delay bus sends. I set the aux sends on the channels to post, and have the FX in the AUX return section. I've tried putting it in pre or...

Update, it appears that my old rig was set to use the shutdown.mxs session and the file was corrupt. Fresh install and created new mix from scratch, just did a 4+ hour gig and had 0 dropped buffers -...

No, I haven't saved any mix template default. Seeing the same behavior with native and vst plugins - once they're added to a channel I can't remove them.

I recently have been using my SAC rig, which has been in storage for years. I updated to v4.5. I'm having a problem with channels reverting to previous FX settings - i.e., a channel that I had tested...

Curious if any testing was done over the years on XP 64 bit? While the SAC app is 32 bit, could the available RAM >4G be an advantage?

I've been planning to experiment with passing through a PCIe...

This http://www.behringer.com/EN/Products/GI100.aspx

While it's marketed for guitar, it's a pretty good swiss army knife DI - I've used it for guitar, bass, and between amp and speaker with the...

For near the same price as the higher end active DI's, you could sell the Behringer and get an MAudio ProFire 2626 which has two dedicated HI-Z instrument inputs - along with arguably better sound...

Nice job.....but you left out 2 critical features:

1. Padded arm rest
2. Beer holder

Ok, you can do without the padded arm rest ;-)

Seriously though, a padded arm rest would be pretty...

I've had Windows glitch numerous times, acting like a key is stuck - though nothing is physically wrong with keyboard. The Win key can be a pain if it does this while you're typing, you can get half...

If you can get a compatible 0 latency plug-in that will load impulse responses, there are a variety of freely available IR's for acoustic. End result is something along the lines of the Fishman Aura...

I would like to see something similar to the Sonar X2 touch implementation for Win8. Nothing complex, just the intuitive swipe and pinch movements. Swiping the channels in full mixer view of SAC...

I've done several gigs with all-in-one rack. To me, the downside is cable routing on/around the stage - it can get messy quick with all of the inputs, outputs, and AC going to one spot. On large...

What app(s) are you using on the tablets? Have you tried, instead of running separate VM's, running multiple instances of SACRemote and RTPMidi?

What app(s) are you using on the tablets? Have you tried, instead of running separate VM's, running multiple instances of SACRemote and RTPMidi?

Steep slope is warranted for HPF on sub, IMO, to help prevent over-excursion.

t

Played with this some more and it appears that you are correct. I hadn't noticed at first that the hot channel moved with the bank switch (hardware links all off). Using the bank up/down on the...

I just got my first BCF, and have played with it a bit. Using the Bank switch seems glitchy to me, the BCF faders won't update.

As a test, I loaded up the first 2 Sysex files in Presets 1 & 2, and...

For SAC use you don't need routing at all, just access point and maybe a small switch if you need more than one Ethernet port. I like the DDWRT firmware on a post-Cisco Linksys, because I can set it...

I wondered the same thing, the OP mentioned cued sound FX....curious to know more about what this entailed.

I own the same laptop along with a Profire 2626 and 2 x ADA8000's. I'm still tweaking, haven't used it live yet. I have it set up to dual boot Win7 and XP, so far it seems more stable on Win7. The...

Thanks all. gdougherty I'd like to run 24bit if possible, just don't know if it's going to be stable over firewire with the Profire 2626

I have been running at 48k with a Profire 2626, in order to use SPDIF output from an outboard preamp which can only work at 48k. I have been running SAC at 48k/16 bit, wondering if anyone else has...

How about something like this for a control surface?
http://www.youtube.com/watch?v=nWhbKHNildM

With the SAC demo, it doesn't seem to save the audio assignments and driver model - is this a demo limitation? I've saved sessions but have to reset these every time it loads.