I didn't use many different models of tablets, but I had good success with used Motion Computing LE1600 and LE1600 tablets. They are, now, cheap, pen-only(Stylus) and basically reliable older...
Type: Posts; User: JeremyJo
I didn't use many different models of tablets, but I had good success with used Motion Computing LE1600 and LE1600 tablets. They are, now, cheap, pen-only(Stylus) and basically reliable older...
I don't post much, but when I do...
OK, just kidding.
I found a pretty nice headphone amp through Elite Core Audio. They have a nice, fairly rugged headphone amp with Mono/Stereo switch two...
Haven't posted in a while, but I saw the post about the braided cable thing and I just wanted to relay my experience. I've bought, maybe a dozen of these cables and really didn't like them. Too...
Wish the bcr were more "native" to SAC. I couldn't even get my bcr to talk to my sac host with win7. I gave up, but I like the concept a lot and I'm pursuing it via other means.
I know about the shift+arrow button but as many channels as I'm using and as small as those buttons are, it would be easier to have a single bank button. The Behringer bcf2000 template has a single...
In this case, the riser is "rigid". There is no cable associated, the riser plugs into an open PCI slot and turns the orientation 90 degrees.
I see what you're saying though, this is a Lenovo...
Bob, may I suggest that the Zoom view channels were a good size but the fader knobs and buttons were too small within them. Would you consider enlarging the fader knobs and mute and solo buttons,...
I have a Lenovo M55 small form factor computer with a right angle PCI riser. It works well with the MOTU 424 card.
I have other issues with the Lenovo box, but the riser card seems to work...
OK, I used the Asus T100 tablet for a rehearsal yesterday. I don't get to play often, but I was asked to play bass for worship this Sunday, so I had the table with me.
Few observations from actual...
@CGrafx
1. No, we have six wireless mixes on Sennheiser IEM 300 G2 versions and I haven't been happy with the sound of the limiters, though I could try again. They work fine, but the limiter...
@Naturally Digital
Correct: we're using 424-PCI (not PCIe) - is it shown somewhere that the PCIe card has lower latency?
Does the RME card have lower latency or is it more stable at 1x32 than...
Y'all are right. There's nothing better that can be done.
Except we're all in ears.
I do have a pretty good understanding of phase and latency and I'm doing all the tricks I know.
I was/am asking how/if I can take the whole system performance level...
Here's my reasoning for suggesting latency as an issue for vocalists. If you are able to listen on iem and can adjust latency, either by adjusting SAC settings or a delay somewhere else, you will...
We are at 1x64 and generally no latency complaints, but I really think a lot of reason vocalists "can't hear themselves" often is related to the latency we do have.
Any reduction of significance...
So, in the quest for better SAC accessibility and trying to make the most of the system, I bought a Asus T100 tablet to try.
Best Buy, $349 and change. Full Windows 8.1 and no problem loading...
So I perused several threads regarding the bcr2000 and SAC 3.1, but I haven't found a clear answer.
Can you run two BCF2000(or two Motormixes for that matter) for mutes, faders and solos AND one...
I've seen where disabling the AHCP(can't remember acronym) power mgmt in bios fixed slipped buffers. Maybe related. Might be worth putting battery back in and trying to disable power mgmt in bios or...
Would the new midi template enable the use of a Tascam US2400 controller more efficiently?
I don't know if I'm getting old or cranky or what? But our services seem to be getting more mix intensive...
We use a mix of wired and wireless iem. Anyone who has a cord to their instrument is wired, drummer, bass player, keys, electric guitar and an occasional mando player. We have three bgv and one lead...
I have an older 1.83Ghz Mac mini I'm doing exactly that with, but as Richard said, I can only use an external interface. I'm using an older MOTU 828mk1. So I have 18 ins and outs. It's good for what...
You're missing out.
@Tomy
Tried unchecking the F mixer follows hot channel and that didn't work.
We have over a hundred kids on stage this morning, singing songs for Christmas. Trying to follow playback track and...
We use two Motormix units ganged together to have some hardware control over SAC. I have F keys set up to take me to groups of necessary channels quickly. I also have an f key and masters set up to...
Connect With Us