Some light reading about phase from an expert.
http://www.soundfirst.com/EQ_Phase.html

When you "align" speakers you align the signals to a time reference (not by phase). Such as having the...

Priceless!

Larry B

I am using the spdif to sync the cards. Using a jumper between the DB9 connectors on the cards. When I get some time I think I will swap the cards as master and slave and change slots and see what...

Never had this problem using a single RME9652 card. Only when I recently added a second card do I get the clicking. It is low level and sometimes hard to hear but it is there only when there is a...

Auditorium seats about 350, about 50' x 65' built in 1923. It is the acoustical pit from hell! Basically a concrete and plaster box with plastic seats. Empty the room has an STI of about -10. Flat...

On a reboot I forgot to disable it and it got me. Actually my fault. I think some of the old folks had to put new batteries in their pacemakers after I moved the front few rows back when it happened....

YUP! using 27 channels of wireless plus a keyboard.

Larry B

One card is master and everything else is slave. rebooting computer fixes it for sometimes hours and sometimes it comes right back. double checked all ADAT cables. All ADAs are sync'ed. It is weird,...

Well, I guess it was my fault because I did not make sure it was turned off but during the final show of a high school musical this weekend of South Pacific I had all 27 of the kids wireless mics...

The books are not directed at mixing, but rather are books that cover the basics of many aspects of audio. The purple book is about 200 pages and is written in a style that is fairly easy to...

I do church consulting work. I have a minimum charge of $100 to arrive onsite and that will cover 1 hour. Each additional hour is $75 and depending on distance I may charge for travel. Offsite time...

PhaseShifter, I think that did the trick. The one thing that got me was that I had t reboot the system after making the changes. It seems if the system does not boot to the correct settings for the...

Maybe someone here can help me figure out what I am doing wrong. I have a 24 ch system using a DIGI 96 36/52 card that work fine. I want to add a second card of the same type. Here is the problem:
...

Just my experiences.

I have used the Samson SE10 a couple times and I find it stays put better than any other single ear mic and the sound quality is pretty good. At $100 with the different...

I don't do any big boy theater. Mainly high school musicals and community theater so they pretty much get what I give them. The headsets I use are double under the ear and are prety unobtrusive....

Like others have said Countryman and DPA are probably the best sounding headset mics. Breath noise can usually be eliminated by proper mic placement. For musicals/theater I would not recommend a...

Helped a church build a system a couple years ago on a WIN7 box. MOBO had 3 slots and the RAYDAT card would only show up in deveice mgr on one of the slots. It would not be recognized when put in the...

I don't like trying to mic an amp unless I have too. The AER stuff is really nice and I think most of them have XLR balanced line out so hooking it into a system is very easy. Some amps are just a...

you need to not think of sound waves as a sine wave coming out of a speaker. That is an analogy or representation of the waveform. The sine wave is a visual mathmatical analog of a wave consisting of...

My first choice would be a small pencil condenser or the like. I usually prefer the crisper sound. I don't like to close mic a flute because as the musician moves so does the sound and like RB said...

superfetch is a memory manager similar to the old prefetch but on steroids.

After trying various low cost ways to extend KVM from the host at stage and controls at mix position here is what I have found that works for me.

I use a cheap USB to CAT5 extrender for the kbd...

http://www.homedepot.com/p/Reliance-Controls-PowerOut-Power-Failure-Alert-with-Light-THP207/202216509

Larry B

Just finished my second one of these and Yogi your are right. 3/4 ply is the way to go. Had a fellow over today to show them to him. We were in my 60 x 72 barn and he cried uncle when I cranked it up...

Not sure if I am on the same page as you but if you are looking for a product like the X frame88 or the old MM series but I have had very good luck with the Rane products like the RPM88 8 in 8 out...