Finally got around to putting the newer Monitor Tap Points into the signal flow diagram and a few other small updates.
http://www.rbicompaudio.20m.com/SAC.html
Click on the SAC Diagram link.
Finally got around to putting the newer Monitor Tap Points into the signal flow diagram and a few other small updates.
http://www.rbicompaudio.20m.com/SAC.html
Click on the SAC Diagram link.
Richard B. Ingraham
RBI Sound
http://www.rbisound.com
Email Based User List: http://tech.groups.yahoo.com/group/sac_users/
Richard,
Great, thanks for all the work.
Is there an option for monitor tap point src pre a?
Yes, that is on my drawing, but for some reason, the link is still pointing to the older file. I'll have to figure out why.
Should be fixed now! Try again.
Make sure you hit refresh in your browser when you go to the link.
Richard B. Ingraham
RBI Sound
http://www.rbisound.com
Email Based User List: http://tech.groups.yahoo.com/group/sac_users/
Diagram for outputs missing that the post-fade solo bus is typically pre-post-fade fx unless selected in the mixer menu. Just FYI.
Richard B. Ingraham
RBI Sound
http://www.rbisound.com
Email Based User List: http://tech.groups.yahoo.com/group/sac_users/
Thanks
Great work Richard - thank you.
cheers mako
Denis Hillman
Queensland
Australia
Connect With Us