Working on a revised version of Lights On for Steve's rig
He'll be using the 3M screen with this shade.
Lights On 06
Need a few of you to check for graphic issues before I change the site .
Thanks
Hap
Working on a revised version of Lights On for Steve's rig
He'll be using the 3M screen with this shade.
Lights On 06
Need a few of you to check for graphic issues before I change the site .
Thanks
Hap
Shades and Shade Toolhttp://www.sentinelmusicstudios.com/rml_studios.html
Hap, like the faders more than 05. Working fine here. Nothing glitchy.
Tried everything I could. I got my machine up to 90% load with no slipped buffers. (usually runs at 30%). Played the F keys hard. Every pop up fader was smooth.
Really nice job on this!
I know you have a lot of things going on right now, but do you think you could make Phase Two of this project a change of the lettering on the F-Mixer and the numbers on the Out Assign section.
Altho I LOVE Bob's font, it would be nice to have all the lettering and numbers be consistent, i.e., the nice clean font that's everywhere else.
Currently using:
T43p Thinkpad w/XP SP3 for FOH, Subs and Front Fill Mixes (20% CPU load);
T500 Thinkpad w/Win7 SP1 for 6 Monitor Mixes (15% CPU load)
Running at 2x32
2 Digifaces, 1 w/CardBus, 1 w/ExpressCard
3-Octamic-D for mic inputs - using the dual outputs to split the ADAT signal to the Digifaces;
1-RME ADI-8 Pro for all FOH sends; 1-RME ADI-8 Pro for all Monitor sends;
Howdy All,
This is rev 06b. A shade with a couple of the requests in place.
Now I'm trying to maintain a lot of what Bob has created as a graphic default, plus this one look great on the 3M monitor.
Lights On 06b
Shades and Shade Toolhttp://www.sentinelmusicstudios.com/rml_studios.html
Looks Good Hap!
Thanks!
Richard B. Ingraham
RBI Sound
http://www.rbisound.com
Email Based User List: http://tech.groups.yahoo.com/group/sac_users/
Thanks Hap!
You changed the F-Mixer font! Awesome! It looks great.
How about the numbers in the Out Assign section of the W-Mixer? Can you "fix" those, too?
Currently using:
T43p Thinkpad w/XP SP3 for FOH, Subs and Front Fill Mixes (20% CPU load);
T500 Thinkpad w/Win7 SP1 for 6 Monitor Mixes (15% CPU load)
Running at 2x32
2 Digifaces, 1 w/CardBus, 1 w/ExpressCard
3-Octamic-D for mic inputs - using the dual outputs to split the ADAT signal to the Digifaces;
1-RME ADI-8 Pro for all FOH sends; 1-RME ADI-8 Pro for all Monitor sends;
Connect With Us