Close

Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. Unhappy Problem with SAC, Raydat and ADA-8000

    Hi. I buy the program and i have a problem. Sac work very fine for hmmm five minutes... them it have problems with the sound (glitches and crackling) and finally have a latency for 1 second... i must to shutdown the live mode in sac, the put the live mode on again and Sac work again for other five minutes... I don't know what happend... I have a i5 processor and i turn of the HT in the bios. And i modify the boot for single cpu like say in the manual. I test with 32*1 64*2 and 128*3 buffer and still the problem. With ASIO mode with two raydats... Can be the word clock? I have with slave mode and ADAT IN in ADA-8000 and Raydat number 1 clock mode master. The second Raydat in Auto sync (for now i have one card only connect to 4 ADA-8000) I must to put WDM mode in 1 for active the usb audio for BCF2000 (don't appear if i put more than 1 WDM) and i am working with 48000 khz.

    Please help me... when Sac work is a great program...

  2. #2
    Join Date
    May 2004
    Location
    Greensboro, NC
    Posts
    1,867

    Default Re: Problem with SAC, Raydat and ADA-8000

    If you take the 2nd RayDat card out, does it work?
    -Craig

  3. Default Re: Problem with SAC, Raydat and ADA-8000

    Same problem...

  4. Default Re: Problem with SAC, Raydat and ADA-8000

    Oh wait a moment. Can be a unsync with the cards... checking...

  5. #5
    Join Date
    May 2004
    Location
    Greensboro, NC
    Posts
    1,867

    Default Re: Problem with SAC, Raydat and ADA-8000

    That's what I was thinking.
    -Craig

  6. Default Re: Problem with SAC, Raydat and ADA-8000

    Well now i am waiting with one card active... for now no problem but still waiting...

    If that could be the problem how i can fix?

    Thanks...

  7. #7
    Join Date
    May 2004
    Location
    Greensboro, NC
    Posts
    1,867

    Default Re: Problem with SAC, Raydat and ADA-8000

    Both cards have to be clocked together. I'm not sure how to with the RayDats, but I believe it's with an internal jumper of some sort.
    -Craig

  8. Default Re: Problem with SAC, Raydat and ADA-8000

    Well now the problem is fixing... It was a problem with the sync of the raydats... One raydat work fine... I guess i must to connect internally a cable for the sync...

    Thanks for you help Craig Allen... I didn't know the cause of the problem...

    Thanks...

    And now to enjoy this great program...

  9. #9
    Join Date
    May 2004
    Location
    Greensboro, NC
    Posts
    1,867

    Default Re: Problem with SAC, Raydat and ADA-8000

    Glad it worked out easily!
    -Craig

  10. #10

    Default Re: Problem with SAC, Raydat and ADA-8000

    Use the internal sync cable between cards... then set the second card to sync from the internal connection in the second tab of the driver.

    Bob L

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •