Re: SPDIF Input
Originally Posted by
gdougherty
Found a recording loopback in the RayDAT manual as well. Don't get it without the unit in front of me though. Reading manual on iPhone doesn't help either.
It's very simple to activate the Loopback Mode in TotalMix. Ctrl-Click the area underneath the TotalMix input fader with the white label. The label turns to red, indicating that the channel is now in Loopback. Then you can pick it up in SAC.
But understand that you have to use 1 of your RayDAT inputs. With RayDAT, you probably have enough to spare. But with Digiface, using 2 of my 24 inputs for stereo playback (SPDIF is being used for solo) might be a problem.
Last edited by IraSeigel; 08-22-2011 at 05:56 PM.
Currently using:
T43p Thinkpad w/XP SP3 for FOH, Subs and Front Fill Mixes (20% CPU load);
T500 Thinkpad w/Win7 SP1 for 6 Monitor Mixes (15% CPU load)
Running at 2x32
2 Digifaces, 1 w/CardBus, 1 w/ExpressCard
3-Octamic-D for mic inputs - using the dual outputs to split the ADAT signal to the Digifaces;
1-RME ADI-8 Pro for all FOH sends; 1-RME ADI-8 Pro for all Monitor sends;
Connect With Us