Hello,
Is there a way to have MWS output show up in SAC?
I have a number of MIDI files I would like to load in MWS, which is connected to Kontakt, then link to SAC for audio ouput.
Please advise.
Hello,
Is there a way to have MWS output show up in SAC?
I have a number of MIDI files I would like to load in MWS, which is connected to Kontakt, then link to SAC for audio ouput.
Please advise.
Dave "it aint the heat, it's the humidity" Labrecque
Becket, Massachusetts
Hello,
As a VSTi in SAW.
I think I "figu'd" it out...you have to use either the Input Chan Play Tap At PRE-PATCH option or the Input Chan Play Tap At PST-FDR option.
That seems to do it...though not sure exactly how...yet.
Thank you...
You can also use hardware midi ports and cables or a virtual midi cable to connect the MWS midi outs to the vsti plugs patched into SAC... this has the added advantage that the plugs are always live while the SAC engine is live.
Bob L
I was going to make Bob's suggestion of loading it in SAC and use a "Virtual Midi Port" to communicate between the two.
Brett
EDIT: Here's a link for a free virtual midi cable.
http://www.midiox.com/index.htm?http....com/myoke.htm
Last edited by brettbrandon; 10-08-2013 at 01:19 PM.
Yes, you can use the same RME card for both ins and outs.
Bob L
Last edited by mr_es335; 10-09-2013 at 08:28 AM.
Thanks for the info Dell and others. I need that right now.
Cheers - mako
Denis Hillman
Queensland
Australia
Connect With Us