Motormix oddities

[jlklein]

Bob, Donnie, I'll try those suggestions Wed night.

KUI, it's version 3.1.

Thanks,
Jeff

[jlklein]

So I haven't gotten a chance to run the burn in test, but I did verify that the issue only happens when the MIDI Active In is set to enabled. I made 5 short video clips of the anomaly in a playlist on Youtube:
https://www.youtube.com/playlist?lis...D7z4EUzegSFQN5

The videos show as follows (also noted in the descriptions of each video):
1 - flipping between F1 and F2, showing Motormix channels 1, 2 and 4 ending up in new positions.
2 - same actions but with no MIDI In or Out Active selected, so no Motormix connection and no issues.
3 - after MIDI In and Out re-enabled, repeating the test and showing how the screen shows correct but the Motormix has a fader out of position, and as soon as I move the Motormix fader, the SAC fader jumps to match.
4 - same actions as #1 but with no MIDI In Active selected (MIDI Out is still selected), and no issues.
5 - MIDI In and Out Active are both re-activated again, so this is the same setup as #1...however, now there are no issues. So, possibly the re-connection of the MIDI In Active link re-sync'd something, but not sure if that's a SAC thing or a Motormix thing...or why deselecting and re-selecting both In and Out links didn't clear the issue...

Jeff