Behringer Xtouch fader packs?

[jlklein]

Anyone using them with SAC?
If so, are they limited to 1 pack like most surface templates or are they daisy chainable like the BCF and Motormixes? (Pre-4.0 SAC).

My Motormixes are going belly up and apparently CMLabs' website is not up anymore.

Thanks,
Jeff

[jlklein]

So Bob, maybe you can answer...will the new Berhinger Xtouch work with pre-4.0 SAC, and if so, what are the limitations? I.e. would the scribble strips work with it?

Thanks,
Jeff

[Bob L]

I have not tried one... if they have a Mackie mode it may work with the existing MCU Pro templates.

I will check with Uli and see if he can send me one to test and or create a template for.

Bob L

[Himhui]

X-touch works fine on SAC 3.1 with MCU Pro template but not with BCF2000 template.

[jlklein]

X-touch works fine on SAC 3.1 with MCU Pro template but not with BCF2000 template.

And the Scribble strips work as well?

Thanks,
Jeff

[jlklein]

I have not tried one... if they have a Mackie mode it may work with the existing MCU Pro templates.

I will check with Uli and see if he can send me one to test and or create a template for.

Bob L

Thanks, Bob. I'll be curious to see if they would end up being daisy-chain-able like the BCF2000 and Motormix, or limited to one pack like the Mackie.

Jeff

[Bob L]

With SAC 4.2 you can use three MCU Pro Mackie units.

Bob L

[Himhui]

And the Scribble strips work as well?

Thanks,
Jeff

Yes, it can show six characters.