Close

Results 1 to 6 of 6
  1. #1
    Join Date
    Feb 2010
    Location
    Quad Cities Il
    Posts
    736

    Default Show control midi trigger not working ??

    I know I have used midi to trigger show control global play but I can not get it to work
    I am trying to get a global play start by using Booms midi translator converting a keystroke to midi note on 90 05 01 which should be note on ch 1 note F1 velocity 1
    I can use a midi monitor to show it works
    I have SAW set for midi in Booms midi out 1 and midi in active in show control trigger in active global play set to F1 but get no start
    If I use last midi note in chooses F0 but still doesn't work

    Help I have 2 musicals going on and it would really help

    Butch

  2. #2

    Default Re: Show control midi trigger not working ??

    Make sure to also activate the midi in/out active options in the Smpte/Midi menu... these act as master midi activation switches.

    Bob L

  3. #3
    Join Date
    Feb 2010
    Location
    Quad Cities Il
    Posts
    736

    Default Re: Show control midi trigger not working ??

    Yes I have them on
    I am using the control track to send midi to light console
    Just can not get the play trigger to work

    Butch

  4. #4
    Join Date
    Oct 2009
    Location
    Maple Ridge, BC Canada
    Posts
    3,528
    Blog Entries
    1

    Default Re: Show control midi trigger not working ??

    Butch,

    For me:

    Options > Midi Device Setup > Midi-Control Device Out: Assigned to whatever MIDI device you have connected.

    Smpte/Midi > Midi-Control Out Active: Enabled

    Then make sure everything is being send out on the correct MIDI channel.

    I must admit, I have never used this feature of Show Control. What are the settings you have for the following:

    Midi Receive Trigger Active
    Midi Receive Channel: Default is Chan 1
    Global Play Midi Trigger: Default is None

    Also, I see that you are using the Control Track. Can the Control Track not be used alone - that is, without the need of Show Control?

  5. #5
    Join Date
    Feb 2010
    Location
    Quad Cities Il
    Posts
    736

    Default Re: Show control midi trigger not working ??

    Hi Dell
    I was setting up a global Play for Show Control
    Got it working Midi translator was sending out wrong data my mistake
    I am doing a Catholic school musical (Madagascar) not much $ but good community service
    30 EDL's with music tracks with the control track sending Midi to the light control and scene changes to SAC (15 headset mics and choir and floor mics)
    Since I was going between SAC and SAW I needed a global Play next button
    Shows went about as good as small school show can got lots of compliments
    1 more show (Cinderella)at another school Tomorrow
    I am never doing 2 school musical at the same time again

    Butch

  6. #6
    Join Date
    Oct 2009
    Location
    Maple Ridge, BC Canada
    Posts
    3,528
    Blog Entries
    1

    Default Re: Show control midi trigger not working ??

    Butch,

    I am glad you got it worked out.

    I am never doing 2 school musical at the same time again...
    ...What, are you planning to do more shows instead then (Heh!Heh!)?!?

    Butch, You da' man!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •