Just received my RME RayDAT card this morning.

Load is running 60-65 percent at 48K/24-bit sample rate/resolution and 32x1 buffer setting. No dropped buffers after 45 minutes. (will continue to let this run all day)

I have done no system optimizations other than setting SAC /SAW to XP3 compatibility and SAC set to "Force Single CPU" and "Force High Priority Class"

Audio system configuration
-----------------------------------------------------
32 input channels active
- EQ active on all FOH inputs
- Dynamics active on 8 inputs
- 4 AUX sends active on 8 Inputs

4 FOH aux sends
1. Studio Echo/Delay
2. Studio Reverb
3. VST Chorus CH-2
4. VST Classic Chorus

4 FOH subgroups routed to 2 master outs (mains and Subs)

7 Monitor mixes (1 master and 6 stereo mixes)
Mix 1 - Master monitor (Source Pre A)
- Eq Active on all 32 channels
- Dynamics active on all 32 channels

Mix 2-7 Active and output to separate RME stereo outputs

SAW Studio Software running
SAW Link active and 32 channels engaged with Record Ready running (should be same load as active recording)

DMXIS Lighting software running

SAC Remote with FOH rights
- one remote box connected