Close

Results 1 to 9 of 9
  1. #1

    Default 64 bit SAW/SAC Successful Hardware and OS Choices

    Bob, in your experience, what is a known processor/MB/OS combination that, having been thoroughly tested, has worked especially well for you? Do you have a preference among the versions of 64 bit Windows with the new software? Any that are sketchy and should be avoided if possible? Thanks.

  2. #2

    Default Re: 64 bit SAW/SAC Successful Hardware and OS Choices

    All of my large system builds have been with my embedded XP OS up to now... so I can't answer that. I have only been testing the new 64 bit stuff on some basic system builds with Win 7, 8 and 10... I still like 7 best, I guess because it is closest to XP... I am still experiementing with cleaning up win 10 setups... little by little I am getting them thinned down from all the background stuff running.

    Bob L

  3. #3

    Default Re: 64 bit SAW/SAC Successful Hardware and OS Choices

    Okay - that's helpful. I prefer W7 too - but I'm hoping to transition to an OS that's still being supported by it's manufacturer - just on GP. Looking forward to your results with W10, Bob, and hoping for the best.

  4. #4
    Join Date
    Oct 2009
    Location
    Maple Ridge, BC Canada
    Posts
    2,207
    Blog Entries
    1

    Default Re: 64 bit SAW/SAC Successful Hardware and OS Choices

    John,
    ...but I'm hoping to transition to an OS that's still being supported by it's manufacturer...
    ...John, a couple or "things"...

    First, contact the major hardware developers, such as RME, Antelope, Behringer - to name just three, and ask them where they see driver support going. All three have told me personally that they see no immediate end to Windows 7 support.

    Second, in a recent Dell OptiPlex build, I was able to get Windows XP to work on this 3-year old system. Some drivers were a bit hard to find, but if you know where to look, they can be obtained.
    * This was just a "test" system, not ever to used in actual production. I just wanted to see if installing Windows XP could be accomplished.

    Third, I have been working with Windows 10 now for a bit, and other than the "flat-look" of Windows 10, I have been able to reduce much of the overhead that comes with Windows 10.
    * This being said, it is really too bad that Microsoft does not make the LTSB version of Windows 10 available to audio users. With this version you can turn off pretty much everything that is not required. I have found the same "tweak-ability" if the Home and Pro version not so. For example, Cortana keeps popping her head up every now and then. Any "fixes" that I have tried have worked for a bit, then these fixes apparently fail after a time. Wirth LTSB, there is no Cortana at all.

    I hope you find this information helpful?

  5. #5

    Default Re: 64 bit SAW/SAC Successful Hardware and OS Choices

    Dell, I'll use whatever I have to. I still have an XP installation running SAC and SAW. But, my experience is that it's nicer have access to whatever the majority of providers are writing for at the time. I think W7 isn't slated for a complete exit until 2020 - which is fortunate for me because this very machine I'm writing to you from is running it. Like Bob, I just prefer W7.

    Still, I think this may be the last time we go through a major change with SAW, although I could be wrong. I expect to use this for the rest of my life. I have first hand experience with one thing after another requiring something that my XP system doesn't have access to - although it records just as well as it did on the first day. It will be nice to be able to run my Fishman Triple Play through the new system using their software. A VSTi drummer is in my future now. There are usually work-arounds for systems that have gone around the bend - but it will be so nice to be relatively current and not have to work-around at all. The longer that situation can last - the better for me. So, I'm hoping to build this new system to be solid - but also as future-proof as possible. But, as I said, I'll use whatever I have to. I've been running SAW for twenty years now - I don't really want to change.

  6. #6
    Join Date
    Oct 2009
    Location
    Maple Ridge, BC Canada
    Posts
    2,207
    Blog Entries
    1

    Default Re: 64 bit SAW/SAC Successful Hardware and OS Choices

    John,
    I've been running SAW for twenty years now - I don't really want to change.
    ...The way in which SAW - and SAC for that matter "work" I see no need to change either.

    I do find it interesting that when an application is launched, the desktop area of the system would be obscured by the application. So, could someone tell if the system was running Windows 10 or Windows 7?
    * Note: I think you actually could - due to the "flat" look of Windows 10. The same could be said for Window's XP and Windows 7.

    Just for interest.

    Note: I recently had the opportunity of working with three new motherboards, an ASUS, a Gigabyte and an MSI. Of the three, the MSI was the nicest to work with - the ASUS...the worst. I really do not like the way in which manages the BIOS settings. MSI, again was the preferred. Gigabyte was in-between the two. What this means to me is that though I have been using ASUS for years, I would probably opt for an MIS board. All systems used an 8th gen i5, 16GB of RAM and either an ADATA 120G or 240GB SSD, along with a 500GB or a 1TB WD Black series HDD.
    Last edited by mr_es335; 01-08-2019 at 02:37 PM.

  7. #7

    Default Re: 64 bit SAW/SAC Successful Hardware and OS Choices

    Well... let's give Bob a chance to zero in on a system. He always comes up with one that is rock solid and capable. Those are the qualities I'm looking for. Measure twice - build once, you know?

  8. #8

    Default Re: 64 bit SAW/SAC Successful Hardware and OS Choices

    Bob, I've been looking at high-end processor clock speeds and there are very few that are made to run as high as 4Ghz anymore. I have an 8086K in my gaming machine that is made to run at 4Ghz stock. I overclocked mine to 5Ghz with a water cooler on an Asus gaming MB and it was an easy hack. On the one hand, it's a six core processor and five would be relatively idle, but on the other - that sixth one would be running pell mell at least. I wonder whether the 8086K might be a good SAC/SAW processor?

  9. #9

    Default Re: 64 bit SAW/SAC Successful Hardware and OS Choices

    Its all speculation at this point... just have to experiment and see what ends up the best choice.

    Remember... many cores does not necessarily equate to higher performance... in many cases... less performance... too many chefs in the kitchen.

    Bob L

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •