Tutorial: Updating 32-Bit Shades to 64-Bit Shades

[mr_es335]

Hello,

I have just completed a tutorial entitled, "Updating 32-Bit Shades to 64-Bit Shades". This tutorial is some seven pages in length and does not require any previous knowledge of how to use the Resource Hacker application.

Along with the lesson cover, there is a ZIP file provided that contains everything that you will require to complete the accompanying tutorial.

Everything that you will need to know about converting shades from 32-bit to 64-bit will be covered in some detail in this tutorial.

Remuneration
This tutorial has taken me some 8-10 hours to complete and has been tested and re-tested to ensure that all is working as it should. As a result, I will be asking for a small donation for those that are interested in learning to perform this operation for themselves. You will find all of the information on the RML Studios Tutorials Page.

Once I have received your donation, I will then send you a link to download the lesson cover and the accompanying ZIP file. All of the donated funds will go towards the eventual purchase of the 64-bit versions of SAW and SAC - as I have always used these applications "in tandem".
Note: As a point of interest, though I was prepared to pay a nominal fee for the updates, I found that I was first, unprepared for the upgrade fee from SAWStudio Lite to SAWStudio Full. (I completely concur with Bob on the practicable reasons for not providing a 64-bit update for SAWStudio Lite.) And second, the current state of our wonderful Canadian dollar in relation to the American dollar. Both of these "anomalies" have left me a bit short at the moment.

Your support for this tutorial will be very much "under-demeciated"!