Close

Page 3 of 3 FirstFirst 123
Results 21 to 25 of 25
  1. #21

    Default Re: re-sizing mixer view SSL

    Ah. Thanks. When I read "double-click in the left-client edge..." I thought it meant the edge of said area (what else could it mean?), so I double-clicked the edge -- to no avail. Double clicking on the buttons themselves does the trick. Though, interestingly, for me the E Mixer window opens on the right side of said toolbar, not on the left side, like for you.

    Name:  E mixer pop-up.JPG
Views: 69
Size:  70.3 KB

    Oh, wait -- I see. I apparently don't have enough space to the left of the MT window, so the E Mixer opens on the right of said tool bar. Odd, because I have a Z Mixer channel over there, typically. But maybe I've tightened it up over there with my custom F-key views a few pixels more than the E Mixer likes.

    When I move the left edge of the MT window over a little to the right, I get the same behavior as you do.
    Last edited by Dave Labrecque; 02-01-2019 at 03:45 PM.
    Dave "it aint the heat, it's the humidity" Labrecque
    Becket, Massachusetts

  2. #22
    Join Date
    Oct 2009
    Location
    Maple Ridge, BC Canada
    Posts
    2,478

    Default Re: re-sizing mixer view SSL

    Dave,
    [QUOTEThough, interestingly, for me the E Mixer window opens on the right side of said toolbar, not on the left side, like for you.[/QUOTE] ... Whew!!! I though for a moment that it just might have to do with you being on the east coast - and me on the west?!

  3. #23

    Default Re: re-sizing mixer view SSL

    Quote Originally Posted by mr_es335 View Post
    Dave,
    [QUOTEThough, interestingly, for me the E Mixer window opens on the right side of said toolbar, not on the left side, like for you.
    ... Whew!!! I though for a moment that it just might have to do with you being on the east coast - and me on the west?![/QUOTE]

    There IS a foot of snow on the E Mixer out here, FWIW.
    Dave "it aint the heat, it's the humidity" Labrecque
    Becket, Massachusetts

  4. #24

    Default Re: re-sizing mixer view SSL

    Again, thanks for all the interest in this question.

    I'll answer the questions posed to me: Yes, same res for both monitors 1280 x 1024

    I did not get a new video card, just updated my current card. When I did that all of my saved views were "shrunk" and not in the "proper" position. That's why I said I was trying to re-create them from memory. That's when I thought the F-mixer was not scaling properly. From memory I thought it filled the whole screen, now I see it has a mximum vertical length...I'm OK with that, just thought I was missing something. So I recreated all of my views but still couldn'e get the E-mixer full length.

    Bob was right (of course). I went back to default settings and the E-mixer was full size so I just started from there to re-create my views. And as someone previously noted, the E-mixer starts on the left side of the screen but if you double click on a channel it jumps to the F-mixer view.

    As Naturally Digital said "The trick is always remembering how we fixed it!"

    Thanks again for all of your input!

  5. #25
    Join Date
    Oct 2009
    Location
    Maple Ridge, BC Canada
    Posts
    2,478

    Default Re: re-sizing mixer view SSL

    smp,

    I am glad that you finally resolved your issues.

    From my personal experience, every time I have either changed a video card or monitor - all of my F-Key settings would need to be re-configured.

    Regardless, when completed, I always save my F-Key setups under File > F-Key Files > Save and Save Alternate.

    A question that I had regarding the choice of the E-Mixer in the location of where the Z Mixer resides - at least in SAWStudio Full anyhow, is that Basic does not come with the Z-Mixer. And though SAW Lite does come with the Z-Mixer, maybe in keeping with Basic, Bob had the E-Mixer positioned in the same location as in Basic on first launch.

    Name:  1.png
Views: 33
Size:  3.8 KB

    Regardless, I have always positioned the Z-Mixer in the same position as in SAW Full.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •