Close

Results 1 to 7 of 7
  1. #1

    Default Zoom Mixer not linked to hot channel

    Hi,
    during my testing I recognized that the zoom mixer seems not to be linked to the hot channel anymore. I use 4.6 and everything else seems to work fine. Double checked the 'Link Zoom Mixer View to Hotchanel' setting.
    3 * TIO1608 + AIC-128 + X-Touch + Dante -> AES + DADC-144DT

    SATlive is my measurement software
    DIN 15905-5 (German SPL Limit)

  2. #2
    Join Date
    Oct 2009
    Location
    Maple Ridge, BC Canada
    Posts
    3,517
    Blog Entries
    1

    Default Re: Zoom Mixer not linked to hot channel

    Hello,

    Working alright here. Try closing and then adding the Z-Mixer view - View - Zoom Mixer. See what that does?

  3. #3

    Default Re: Zoom Mixer not linked to hot channel

    Hi
    close -> open -> Z-Mixer will come up with a wrong channel number.
    Noticed the problem only after doing some F1-F12 stabiltiy test.
    Cleared the default key file -> all ok.
    3 * TIO1608 + AIC-128 + X-Touch + Dante -> AES + DADC-144DT

    SATlive is my measurement software
    DIN 15905-5 (German SPL Limit)

  4. #4
    Join Date
    Oct 2009
    Location
    Maple Ridge, BC Canada
    Posts
    3,517
    Blog Entries
    1

    Default Re: Zoom Mixer not linked to hot channel

    Tomy,

    So ... all is working now?

  5. #5

    Default Re: Zoom Mixer not linked to hot channel

    Yes.
    Seems that there was something broken in the F-Key file.
    3 * TIO1608 + AIC-128 + X-Touch + Dante -> AES + DADC-144DT

    SATlive is my measurement software
    DIN 15905-5 (German SPL Limit)

  6. #6

    Default Re: Zoom Mixer not linked to hot channel

    Realize that if you right-click the Zoom Mixer Close button, it will lock the mixer to the current chan and it will no longer chase until you unlock it by right-clicking the Close Button again.

    Bob L

  7. #7

    Default Re: Zoom Mixer not linked to hot channel

    Hi Bob

    Thanks for reminding me on that very nice feature.
    But the problem was not related to it. I was able to close the Z-mixer, which would not be possible when it is locked.
    When I reopen it, it always sticks to channel 47 no mater which channel was selected as hot channel.

    The monitor F Mixer and the Full mixer were showing. The Pop-up shows the mark on the correct position and the monitor mixer tracks correctly.

    But as mentioned before I was able to fix the problem by a reset of the F-Key file.

    Tomy
    3 * TIO1608 + AIC-128 + X-Touch + Dante -> AES + DADC-144DT

    SATlive is my measurement software
    DIN 15905-5 (German SPL Limit)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •