Close

Page 1 of 2 12 LastLast
Results 1 to 10 of 20
  1. #1
    Join Date
    Aug 2012
    Location
    Hungary, Europe
    Posts
    26

    Default Montarbo Stagebox or similar RML labs branded solution

    Dear Bob,

    near future i want to build a festival gig, imaginable that released Montarbo Stagebox or similar this year? I need remote controlled preamps.
    Really like install SAC System in our Church, but in wild: constantly changing channel lists and smallest changeover times i will work complete recallable channelstrips incl. gain settings.
    Thanks for your reply!

    Best Regards,
    Balint

  2. #2

    Default Re: Montarbo Stagebox or similar RML labs branded solution

    I'm currently changing from a motu 2408 based setting to a Dante system.
    Currently I'm using up to three TIO1608-D for I/O and a Audinate Dante -> AES Adapter.
    I/O is done using Yamaha AIC-128D pci-e (4!!) card.
    You can use the Yamaha R-Control. I'm using a SAC-plugin (currently 32 only) and an external server software to control the gains + phantom.
    I've also tried the build in HW I/O but it seems not work correctly at the moment (SAC does not recall / manage correctly).

    Regards

    Tomy
    3 * TIO1608 + AIC-128 + X-Touch + Dante -> AES + DADC-144DT

    SATlive is my measurement software
    DIN 15905-5 (German SPL Limit)

  3. #3

    Default Re: Montarbo Stagebox or similar RML labs branded solution

    Am I reading this wrong.... 4 yamaha Dante pcie cards?

  4. #4

    Default Re: Montarbo Stagebox or similar RML labs branded solution

    yes I am....I see now. Pcie 4 slot.

  5. #5
    Join Date
    Jul 2006
    Location
    SF Bay Area
    Posts
    1,509

    Default Re: Montarbo Stagebox or similar RML labs branded solution

    Quote Originally Posted by Reujonik View Post
    Am I reading this wrong.... 4 yamaha Dante pcie cards?
    Pretty sure its just a single card, you wouldn't need more than one for the 3 stage boxes.
    ---------------------------------------
    Philip G.

  6. #6

    Default Re: Montarbo Stagebox or similar RML labs branded solution

    Sorry for the confusion.
    It's one card. It supports 128 In and 128 Out via Dante.

    Tomy
    3 * TIO1608 + AIC-128 + X-Touch + Dante -> AES + DADC-144DT

    SATlive is my measurement software
    DIN 15905-5 (German SPL Limit)

  7. #7

    Smile Re: Montarbo Stagebox or similar RML labs branded solution

    Hi Tomy,

    can you tell us more about the setup?
    What is the lowest latency you can go down to?
    How many plugins, FX, GEQ, REV, inputs with what PC setup?
    Thanx!

  8. #8

    Default Re: Montarbo Stagebox or similar RML labs branded solution

    Well, I just did three gigs with the Dante based system. This was a maximum of 32 inputs, up to six monitors, three fx ( 2 times valhalla and a chorus) and a bunch of SAC Eq and Delay plugins.
    The performance was similar to the motu system.
    Os is windows 8.1
    Running on 1/64 without any problem. Dante latency settings are 0.5ms (except for the AES/EBU adapter which can not be set lower than 1 ms) and the latency monitor in Dante shows arround 180us latency ( Using a simple two switch network).
    Because my mainboard was quite old (E8600) I'm currently updating to a i3-6320 3900MHz on a asrock B250-M4 Pro board. First tests indicate a significant lower usage ( around 25 % on previous system and around 12 - 15% on the new one), but that's just a bench value.

    Tomy
    3 * TIO1608 + AIC-128 + X-Touch + Dante -> AES + DADC-144DT

    SATlive is my measurement software
    DIN 15905-5 (German SPL Limit)

  9. #9

    Default Re: Montarbo Stagebox or similar RML labs branded solution

    Quote Originally Posted by TomyN View Post
    You can use the Yamaha R-Control. I'm using a SAC-plugin (currently 32 only) and an external server software to control the gains + phantom.
    hello Tommy
    what SAC-plugin are you using? and what external server software?

    jan

  10. #10

    Default Re: Montarbo Stagebox or similar RML labs branded solution

    Hi,

    both pieces of software are created by myself.

    There is a nativ sac plugin which controls gain / phantom of up to 64 channels.



    And a small external server which takes care of the control of the TIO and of the synchronisation on different instances ( host + remotes).




    Tomy



    3 * TIO1608 + AIC-128 + X-Touch + Dante -> AES + DADC-144DT

    SATlive is my measurement software
    DIN 15905-5 (German SPL Limit)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •