Re: Dropped buffers again
After I had to leave SAC64 on Win 10 LTSC for some time now, I want to finish setting up my system.
I've ran through all the Win 10 tweaks from the helpfile.
As a stress test I have a 32 channel setup as FOH mixer with a different plug-in in each of the first 24 channel strips. Connected are 2x ADA8200 In/Out. Approx 50% Load displayed in SAC64.
On one internal channel runs via SPDIF foobar2000 with music.
The RayDAT card I use with 1x64 samples.
The i5-660 with 2 cores active, 12 GM RAM (used is only 2,5 - 2,7 GB).
During the stress tests the network cable is disconnected.
As soon as I switch the mixer live, 1-2 dropped buffers are usually displayed. Rarely without. Then the system runs quite smoothly. After about 5 hours of unattended operation there were over 600 slipped buffers.
Force RealTime Priority is active and a second test I did with addionally with 'Force High Priority Class', as well as tests with 2x64 Samples.
Here in the forum I read various tips such as Process Lasso Pro or about the RuntimeBroker service.
How should I proceed to get the system slipped buffer free?
Walter
SAC Host: i5-660, 3.33GHz, 12GB RAM, Win10 LTSC, (2) RayDAT, (3) Behringer ADA8000 modded, (4) Behringer ADA8200, 26" TFT
Connect With Us