Close

Results 1 to 8 of 8
  1. #1

    Default SAC HW-Interface to Yamaha TIO1608

    Hi
    I've loaded up a beta version of the SAC -> TIO converter.
    It's a simple tool that 'translates' the messages of the SAC HW-IO interface to the yamaha control messages for the TIO stagebox.
    - Run the tiocontrol.exe from https://download.satlive.audio/sac/TioControl.zip
    - Right click on the area at the left. This will open up a setup - menu
    - Enable the entry 'Update Value Display' to show the information in the area at the right ( gain and phantom)
    - Click on each of the TIOx entries to set the IP address of each Tio. Tio 1 will receive channels 1--16, Tio 2 17 -- 32 and so on. Note that you must use the configuration IP of the Tio (which might differ from the Dante IP). Use the R-Control software to set those ips.
    - Note the IP shown at the top of the window.

    In SAC
    - View -> IOIH Control
    - Options -> IO Interface Hardware Device Setup
    - I/O Interface Name / Ip -> Set to the IP shown in the TioControl window
    - I/O Interface Port -> Use either the default port 27659 (also default in TioControl) or set to the same port as set in the TioControl -> Set Port window
    - Activate Active I/O Interface TCP/IP control -> Connection should be established
    - Use Mic - Gain setting to control gain of the TIO.
    - Use Pad to add a 16dB pad ( this enables you to use the full gain range of the Tio ( -6dB to 65dB)
    - Use 48V to control the phantom power of the TIO(s)

    WARNINGS
    - This is a beta version
    - The I/O Hardware Interface in SAC seems not to be quite perfect, especial on save/restore/recall/scenes
    - Use on your own risk

    HINT
    - Being a 32bit win app itself the use of TCP/IP allows the TioControl to work with both SAC32 and SAC64.

    Enjoy

    Tomy

  2. #2

    Default Re: SAC HW-Interface to Yamaha TIO1608



    Just a short preview

  3. #3
    Join Date
    Oct 2009
    Location
    Maple Ridge, BC Canada
    Posts
    2,505

    Default Re: SAC HW-Interface to Yamaha TIO1608

    TomyN,

    Where does one get this application? Great work, by-the-way!

  4. #4

    Default Re: SAC HW-Interface to Yamaha TIO1608

    Quote Originally Posted by mr_es335 View Post
    TomyN,

    Where does one get this application? Great work, by-the-way!
    Dell -- is that not a download link in the OP?
    Dave "it aint the heat, it's the humidity" Labrecque
    Becket, Massachusetts

  5. #5
    Join Date
    Oct 2009
    Location
    Maple Ridge, BC Canada
    Posts
    2,505

    Default Re: SAC HW-Interface to Yamaha TIO1608

    Dave,
    Dell -- is that not a download link in the OP?
    ... I dunno...is it?

    The links do not appear to be so for the software that is being referred to? I could be just reading things incorrectly.

  6. #6

    Default Re: SAC HW-Interface to Yamaha TIO1608

    https://download.satlive.audio/sac/TioControl.zip

    The software runs minimized by default (d.h. you might just see an icon in the taskbar). Click on the icon to open it.

  7. Default Re: SAC HW-Interface to Yamaha TIO1608

    Thank you for sharing your software, Tomy.
    Peter Olsen

    Hardware: Asus TUF Z270 mark 2, Intel Core i3-7350K, 8 GB ram, 250GB NVMe SSD, 2 RayDAT, 2 DSB2408 preamp/converters.
    OS: Windows 10. Buffer: 1X32.

  8. #8

    Default Re: SAC HW-Interface to Yamaha TIO1608

    Very cool! Makes me want to get the Stagebox just to try it out.
    Angie Dickinson Mickle

    The Studio
    http://www.avocadoproductions.com/ze.../recording.htm

    Chris' tribute site
    http://www.micklesong.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •