How do I record a SAC Record Bus in SAW?

[dbarrow]

I have an SAC output assigned to Record Bus 1, but I don't see where to select or arm that in SAW. Any help would be appreciated.

[Bob L]

When you arm a track in SAWStudio and popup the record meter... click in the INPUT area to pick a source for the recording... when the SACLink is active, you will see all the SAC channels as well as the SAC Record Bus options.

Bob L

[dbarrow]

When you arm a track in SAWStudio and popup the record meter... click in the INPUT area to pick a source for the recording... when the SACLink is active, you will see all the SAC channels as well as the SAC Record Bus options.

Bob L

The Record Busses don't show up in SAW64 when I click in the input area of the meter popup. I have Output 3 in SAC assigned to Record Bus 1. Thanks for replying so quickly.

[Bob L]

You are correct... that one slipped by all this time... I'll have a look at the code and try to get a fix up shortly.

Bob L

[dbarrow]

You are correct... that one slipped by all this time... I'll have a look at the code and try to get a fix up shortly.

Bob L

Thanks. I had a radio remote session earlier this afternoon, so I recorded a stereo Output to a Zoom recorder for the video guy. I am hoping to be able to record a stereo output bus to a WAV file, in addition to the multi-track recording.

[Bob L]

A new version with the fix is up for download.

Bob L

[dbarrow]

Thank you so much!