Re: ASIO4ALL Crashes SAWStudio
Originally Posted by
Carl G.
Yep... that's what I'm beginning to think.
I have the most current Lynx driver. I can mix lots of ways with it.
But What is the best way to accomplish the following with the intent of processing various audio live in SAC, and feeding SAC's output to another application (like Zoom).
One senario
1. Have input 3&4 (choose Lynx INPUT 3&4), with Post Fader SFX plugins, and Pre-Fader Aux feed for other SFX plugins...
2. Send 3&4 and Aux mix to Ouput 1, which is sent to Lynx Output 7&8
3. Have Lynx only physical out (1&2) configured to play the app's mixer's 7&8.
3. Configure Zoom App line feed to come from Lynx 7&8 (even tried 1&2)....
The end result of above or any other configuration attempts, indicates Zoom seems to only take a parallel source signal of Lynx, but never the output feeds. I can't get the "Processed" SAC mix down the Zoom line.
ALso, there is only one physical analog/digital stereo input on Lynx.... so bottom line is Lynx is considered 2ch in (A/D)/ 2ch out (D/A) device. (I get other internal virtual ins/outs via Lynx APP)
I've had some luck with Virtual Audio Cable. Have you tried SAC with VAC selected in the output and Windows with VAC selected for the input (mic/line in)? This assumes Zoom is set to use Window's default. You could always select VAC for the Zoom input device.
Dave "it aint the heat, it's the humidity" Labrecque
Becket, Massachusetts
Connect With Us