Hi all, maybe someone know if is it possible in SAW to switch fader level meters to show pre-fader signal? Thus making them unaffected by Mute, for instance.
Thanks!
Hi all, maybe someone know if is it possible in SAW to switch fader level meters to show pre-fader signal? Thus making them unaffected by Mute, for instance.
Thanks!
Last edited by andrew b; 10-16-2023 at 11:11 AM.
There may be a better way, but you might to send to an aux outputted to an unused output.
Meter bridge plugin patched pre-fader.
Dave "it aint the heat, it's the humidity" Labrecque
Becket, Massachusetts
I believe the answer is yes.
Dave "it aint the heat, it's the humidity" Labrecque
Becket, Massachusetts
just out of curiosity, what would be the point of showing meter activity on a channel that is muted or has the channel fader down?
SawStudio is not a live console, the only two audio sources are input when recoding (which has live meters) and playback of the recorded material.
showing a meter level on a channel that is muted or has the fader down would be visually counterintuitive as it would indicate the channel should be contributing audio to the mix when it was not.
if you need to know if there is audio on a specific channel just look at the corresponding record track. it will have an associated region or not.
Last edited by cgrafx; 11-01-2023 at 05:25 PM.
---------------------------------------
Philip G.
Connect With Us