Re: About the native ECHO plugin!
Originally Posted by
Göran Nordberg
Well....I found out all about ECHO , it was there in the help file of course
. Don't remember it being there. Anyway, I found more very interesting things about the little beauty ECHO.
Sounds like you may have found it. But, if not, this is from SAW's help file:
Normal delay mode keeps the left and right echoes in place on their respective channels.
Cross delay mode crosses the left channel echo over to the right channel and the right channel echo over to the left channel. With a high percentage of feedback, you can create a ping-ponging effect of echoes bouncing back and forth between channels. With 0% feedback and a delay time of 20 to 40 ms, you can create the effect known as Cross Delay Stereo, which can give the illusion of a wider overall stereo image from a mono signal source.
>> Creating a Cross Delay Stereo effect requires that the plug-in be patched in Post Fader. The source track must be panned to one side or the other, and the Delay Time should be set between 20-40 ms. Set the Strength for that channel to the maximum setting and select Cross delay mode. This should result in the mono signal being spread across the left/right stereo image. The width of the spread can be controlled by the delay setting.
Dave "it aint the heat, it's the humidity" Labrecque
Becket, Massachusetts
Connect With Us