I just quit a two-hours session with 0.2a.
(BTW the new Monitor mixer source assignment is great, thanks!)
Gears:
Old Sony Vaio NB with Intel Pentium M 1.70 GHz (Texas PCI7x20 1394a)
M-Audio Profire Lightbridge
Settings:
2x64
I used a template (32 channels + 4 monitors) that used to produce a steady 50% load with release 0.1d
When I start the live engine with 0.2a, the load is at 30-32%. Then, it slowly increase 'til 62-64%, and it stay there.
Left-clicking on the load display, I always see 3 (three) slipped output buffers right after engine startup. Then, slipped output buffers increase slowly by ~100 every 10 minutes.
Slipped input buffers is *always* zero.
Connect With Us