just like title.
thx
can i only setup bcr 2000 fader for dac track fader.(9-24)
thx
just like title.
thx
can i only setup bcr 2000 fader for dac track fader.(9-24)
thx
Not quite sure I understand what you are asking?
The BCF2000 units will control the main chan faders... you can use up to 3 units for a total of 24 faders at once.
However, you can use 1 unit and assign it to chase the virtual console and therefore control all 72 channel faders... 8 at a time.
You can easily re-order chans and keep them bunched together for that purpose anyway you like.
Bob L
I'm pretty sure the BCR2000 does not have a template for SAC or SS.
cheers
mako
Denis Hillman
Queensland
Australia
HI
BCR is the rotory unit and BCF is the Fader unit.
I have both and have played with the Rotory as a fader but is't not very useful becacuse you must place the rotory in 14 bit mode to get a 1/4 db res.
Now if your faders at the bottom position you will be spining that sucker quite a while until it get close to the 0 db range.
If you place the rotory in midi standard mode ( 127 ) you will get jumps of 3 db at a time. ( not good )
hope that helps
thanks
fvf
Frank V. Farrell
TD / Kenny Rogers Productions
W0FVF
ETTI,LLC
http://www.CIALLC.com
Knowledge is knowing a tomato is a fruit.
Wisdom is not putting it in a fruit salad.
thx for reply.
i want to konw how can the bcf2000 can control the out put chanle,that 9-24 fader[color is pink} ,i check the bcf2000 now only can control the input chanle 1-24,when use 3 bcf 2000.it mean the sofware now only sent out or recive midi sys file by input fader 1-24,and can not sent outor recive the midi sys file from input fader 25-72,and retrun chanle ,and output chanle 1-24.
i only need 8 fader for below fader use.
one is output chanle master fader1.
2-8 is ouput chanle 9-15 for the DCA control.
thx all for reply
Last edited by caojungt@yahoo.com.cn; 11-07-2008 at 05:41 AM.
As I mentioned in my last reply, you can set the controller chase option in the Mixer menu... then the 8 faders will chase the current hot chan and will control all chans of the mixer, including returns and output chans.
You can also bank switch the 8 faders from the unit itself and work your way up to the out chans.
I also mentioned, you can reorder any chan in the virtual console to any position and therefore denote any 8 faders to show up side by side to be controlled by the 8 faders of the unit.
Bob L
thx bob ,,i got it now .
but i use the macike mct file not bcf2000 mct file for bcf2000 .it is perfeat .
i got all 72 input and return and output chanle control.
including fader, mute, pan ,solo ,eq ,aux ,com ,gate ,fx,input gain,but when i usr bcf 2000mct file ,nothing move on bcf 2000.
anyway ,i can control sac now,so what ever which mct file .
Connect With Us