Re: SAC to SAW Recording
Originally Posted by
mr_es335
Hello,
Thanks for the replies UpTilDawn and Angie. Much appreciated.
Before I look into UpTilDawn's suggestions, in my posting, I have the backing track playing in SAW while I am recording the Electric Guitar on I-01 from SAC to SAW.
As I was told by Dave, as well as in the User Manual, in order to hear the backing track while recording the guitar part, I need to use SRP recording. This makes sense.
Now, when the recording is completed, I now want to hear the newly recorded guitar part along with backing track in SAW. However, I only hear the backing track - not the recorded guitar part.
The only way I have been to accomplish this is in SAW is to disable [Activate SAC Link] in SAW. Then I hear both the guitar and the backing track in SAW.
Is this how it is meant to be accomplished? Am I not able to hear playback without having to disable [Activate SAC Link] in SAW?
Note: Just for clarification, I am not re-recording the backing track part.
I do hope that all of this makes sense?
If you can hear the backing track, then the only reason you wound't hear the other tracks is one of a few of options. The channels are muted, the channels haven't been assigned to the same output bus as the backing track or the channel levels are down.
You absolutely do not need to disable the SAC link.
EDIT:
Ok.. one more option, you have your backing track assigned directly as an input in SAC rather than bussed through one of the normal output channels.
Don't do that. Assign your SAW track channels to output buss 1. Than in SAC playback channel select SAW output 1 as your input source.
Now anything assigned to SAW output Bus 1 will playback through SAC.
ONE MORE NOTE:
Don't get caught up thinking about tracks as literal one-to-one assignments. You can record on any SAW channels you want and freely re-assign them to different track channels after recording.
There is nothing special about a any of the track assignments or recorded tracks. every recorded channel is nothing more than an independent wave file, freely assigned to ANY SAW track channel.
Last edited by cgrafx; 07-20-2018 at 11:51 AM.
---------------------------------------
Philip G.
Connect With Us