I wound up going with the following:
Noctua NH-D15, Premium CPU Cooler
ASUS Prime B360 Plus LGA 1151 ATX Intel Motherboard
Intel Core i7-9700K Coffee Lake 8-Core 3.6 GHz (4.9 GHz Turbo) LGA 1151 300 Series
Corsair Vengeance LPX 32GB (2x16GB) DDR4 DRAM 2666MHz
SAMSUNG 970 PRO M.2 2280 512GB PCIe Gen3. SSD
SAMSUNG 970 PRO M.@ 2280 1TB SSD
Rosewill ARC Series 750W 80 Power Supply
Windows 10 ENT LTSC 64bit
Still tweaking it but much faster then expected.
It will be solid for about 10 minutes at 1/32 then output buffer run up after that, CPU load stays at around 10 all the time. With 16 ch running 4 mon and house. After increasing to 3/64 it settles down a bit. but I think my PCI bus is getting stepped on by something not sure. LatencyMon show its fine as does resource Mon. Been using process lasso with SAC and RME set to 4-7 Cores and all system processes set to 0-3.
I disabled CPU C-States and stepping as well as other bios settings but still it will run up output buffers after 10 mins SAC inputs will remain functional but output dies.
Anyone with any ideas?
Kinda freaking out here.
Thanks
Warren
Connect With Us