Close

Results 1 to 6 of 6

Thread: midi

  1. Default midi

    I upgraded from 3.1 to 4.6a just put it on top)) I use - 3 bcf 2000.
    I used to use "midi-ox" virtual cable in midi divice setup. Was alone
    appeared in 3 devices !!! now at a loss how to configure midi ports!

  2. Default Re: midi

    If I remember correctly, you select the BCF-2000-24ch midi template, and set up each of your BCF's in the 3 "slots" in the Midi Device Setup. That should be it!
    Peter Olsen

    Hardware: Asus TUF Z270 mark 2, Intel Core i3-7350K, 8 GB ram, 250GB NVMe SSD, 2 RayDAT, 2 DSB2408 preamp/converters.
    OS: Windows 10. Buffer: 1X32.

  3. Default Re: midi

    is it possible? without third-party programs only SAC manage 3 bcf 2000?

  4. #4

    Default Re: midi

    Yes... there are three midi slots to talk to three midi controllers.

    Bob L

  5. Default Re: midi

    since I don't see more than one (win 10 also sees 3 sac 3 identical devices
    found this https://www.softpedia.com/get/Multim...Patchbay.shtml
    mighthttps://www.freestylersupport.com/wiki/external_control:midi:3xbcf2000_midi_tutorial
    help or this https://www.nerds.de/en/loopbe1.html
    Last edited by andrew b; 04-18-2021 at 01:22 AM.

  6. #6

    Default Re: midi

    Hi,
    When you're using the virtual cable, you'll see just one device (because the virtual cable emulates on midi device for SAC).
    If you just connect each device seperately to your pc, you'll see three devices.

    Tomy
    3 * TIO1608 + AIC-128 + X-Touch + Dante -> AES + DADC-144DT

    SATlive is my measurement software
    DIN 15905-5 (German SPL Limit)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •